How to Install My Belkin Wireless Router?

Method-1

To install Belkin f5d7230-4 wireless router, just follow this way -

Install Belkin wireless router using manual setup -

1. First of all, confirm that you have disconnected Belkin router and modem from the power source.

2. Now, take an ethernet cable and connect Belkin router to the modem through it. Just note one thing i.e., plug an ethernet cable into the open ethernet port of modem and into Belkin router’s port labeled as “WAN”.

3. Connect your modem and Belkin router to a constant source of power supply.

4. Take another ethernet cable for connecting Belkin router to directly to your computer/laptop. Insert ethernet cable into Belkin router’s ethernet port. By doing this, your system will directly communicate with Belkin router.

5. Once physical set gets complete, launch your favourite web browser and type Belkin router’s IP address “192.168.2.1” in the browser’s address bar. If you don’t know Belkin router’s IP address then simply google it, you will find the required info.

6. After entering Belkin IP address in address bar hit Enter. Now you are redirected to Belkin router’s configuration page where you have to enter login details.

Check these login credentials-

Username - admin

Password – leave it empty

Enter the username and hit the Login button. Now, you will be redirected to Belkin router Setup page.

7. Under Internet WAN section, tap on “Connection Type” on the left-hand side.

8. Choose your Internet Connection type, you can set it as “Dynamic/Fixed IP (1483 Bridge)”.

If you don’t know about your connection type, then immediately contact your ISP. Your ISP will provide you relevant network details to enter into Belkin setup.

9. Enter those details and then click on “Apply Changes” button. If you are using PPPoE connection then you have to enter username and password.

10. Check your internet connection status and confirm that it should be “connected”.

Now your Belkin router is successfully connected to the internet, just enjoy hassle-free web surfing.

If you have any problem regarding Belkin wireless router installation procedure then drop a message here, I will help you to evade all technical issues.

But if you need professional assistance for the same then contact Belkin Router Technical Support Number where a team of experts is always available to troubleshoot Belkin router issues.

Method-2

How to set up Belkin wireless router

Here are some easy steps for configuring Belkin router

Turn on your Belkin router and connect your router to one end of the modem and another end to the computer.

Now connect the computer to the router using one more Ethernet cable(In Case You Do Not Have Extra Ethernet Cable Please Reset The Belkin Router And Click On Wireless Icon In Your Computer).

Open the web browser and type either https://192.168.0.1 or https://192.168.1.1 in the address bar and press Enter.These are the default login credentials and can vary contact your Isp for that.

A login prompt will open in front of you. Enter the username as admin and you can leave the password empty to log in.

Now, Go to the wireless settings, You Can now configure the Settings In your Wireless routers Like SSID (Network name ) And Password.

You can change or setup password as you wish By Going Into Wireless Settings And Apply the changes.

After your setup is complete, restart your Belkin Router.

Congrats! You have now successfully configured your wireless.