My belkin wireless router is failing me how can i fix this

Five Reasons Behind Belkin Wireless Router is Failing:-

1) Enabling File Sharing From Your Router

Solution for this problem-:  Various routers include USB ports, such as those from Linksys, Belkin and Netgear. It's all a matter of what software is used to configure the USB drive and whether you need anything else on the Windows or Mac client end to connect to the shared drive.

2) Performing Firmware Updates

Solution-:  It is good to update automatic or at least easily selectable, so you don't have to go through the tortured process of downloading and uploading the file.

Check the firmware update section in each router's Web setup screens to see if the router can automatically upgrade itself

3) Enabling Temporary Wireless Access

Solution-:  It is beneficial idea would be to grant them temporary guest access that gives them just an Internet connection and nothing else on your network, such as shared drives or printers and all.

4) Determining Who is on your wireless Network  

Solution-:  Check out the screens that are usually labeled "Attached devices" or "DHCP client list" to see who is connected and using which IP addresses.

Some companies, such as Belkin , clearly show how various clients have connected and what wireless devices they are using.

5) Changing Your DNS Provider

Solution For this issue-:  First make sure your router supports alternative DNS settings. If you're not sure, see if you can enter your own DNS address on your router's Web-based setup screens instead of just using what your Internet provider .

Then try it out, including installing its software to optimize your individual PC, before messing with any of your router's settings. After you make the change to your DNS, , there is a Java tool that can test your speed to see if it makes a difference.

Depending on how you're connected to your Internet provider, it can help either a lot or not much at all. If it doesn't help, consider going back to your original settings.

Reasons Behind Belkin Wireless Router is Failing:-

If your router is failing you or you are unable to connect to your router, there could be few issues happening. Either the fault is with your router or the device you are accessing the router with, or some network issues.

If your Belkin router is not responding to the device connected with, there are few steps that could resolve your issue.

Some Important Guides in Case You Can’t Access Your Router

1. Notify your ISP(internet service provider ) when all steps fail to set up Belkin wireless router.
2. Do not reset the Internet modem Instead Of Belkin router.
3. Update the Router Firmware OF Belkin regularly

Common issues related to the failure of accessing Belkin router

Intrusion from other wireless devices-

Interference is bound to happen If there is a tussle between multiple wireless devices that also use the same frequency within your network. The interference could be provided with your home appliances like cordless phones, microwave ovens, and smart television. Another factor that causes interference could be a different wireless network which utilizes the same frequency as your router.

Solution- To resolve this issue, power OFF the devices that are possibly causing interference. In addition, you can relocate those devices away from your router. Another solution is to change the current wireless settings of your router.

Low signal quality-

Your internet connectivity depends on the quality and range of signals your device is receiving. Usually, the quality of signals relies on where your router is placed and how far it is from your device. The reason being it affects the performance of your router and you might be losing connectivity due to certain obstructions.

Solution - Physical obstacles such as walls and floors also play a role in internet disconnectivity. Try to move your device to a different location to find a better signal. An ideal location for locating the router would be the center of your house Keep the router away from huge metal objects.

Also avoid areas where there may be a large concentration of water and electronic appliances like television sets, microwaves, etc. It would be recommended if the router is within a visible horizon of the computer. The reason being it creates a strong and reliable wireless connection between the devices.

Upgradation of firmware-

To continue using a stable and fast connection, regular upgradation of the router is needed. It could be the possibility that your device may not be compatible with the current version of firmware and thus displays internet disconnectivity.

Solution -

Update the firmware of your router regularly. You can upgrade your Belkin router with the help of - https://www.belkin.com/us/support-article?articleNum=10797

Contrary wireless settings-

If you have default wireless settings on your router then it may cause conflict with other routers within your network range. To establish a stable connection, it is recommended to change the wireless network name (SSID) of your router. Also, enable the wireless security of the router.

Solution- It is highly recommended to use WPA or WPA2-Personal in the security option. It will help in providing sharpened security as well as establishing a stable connection with your wireless devices.