Setup Belkin Router Without CD

Belkin Router Setup Without CD:

Hello, All answers are great and helpful. I understand these belkin router issues can be a problem somtimes, but no problem lets get this resolved step by step:

Step 1 : Reset the belkin router using a pin or paper clip (hard reset).

Step 2 : Than connect the router with a cable and open cmd type ipconfig.

Step 3 : Find your default gateway ip and type it in you browser url.

Step 4 : Now reset the password and SSID, save it and reboot your router modem computer.

This may solve your issue.

Belkin Router Setup Without CD:

Routers connect a local area network -- a collection of one or more computer devices -- to a wide area network such as the Internet. You can set up a Belkin router in your home or office to enable your computers tablets smartphones and gaming systems to use the Internet at the same time.

Modern Belkin routers include a CD that automates the setup process but if you're using an older model or lost the setup disc you can configure the Belkin router manually.

Step 1: Enter the following Internet protocol address into the address bar of a Web browser: 192.168.2.1

Step 2: Press "Enter" to access the router setup page for the Belkin device. Go to Connection Type found under WAN. Click "Submit" if prompted to log in.

Step 3: Select your Internet connection from the options and then click "Next". Enter your account credentials or the network configuration for your service -- such as your static IP address and your Internet service provider's gateway and subnet mask -- into the appropriate fields if applicable. Click "Apply Changes".

Step 4: Select "Channel and SSID" from under Wireless and then enter a unique name for your network into the SSID field. Click "Apply Changes".

Step 5: Click "Security". Choose "WPA/WPA2-Personal (PSK)" from Security Mode. Select "WPA-PSK+WPA2-PSK" from the Encryption Technique drop-down menu.

Step 6: Create a security key or password for the network. The key can consist of 8 to 63 characters -- including letters numbers and punctuation -- and is case-sensitive.

Step 7: Click "Apply Changes" to finish manually configuring the Belkin router without cd.

Belkin Router Setup Without CD:

Basic step before proceeding with any of the troubleshooting steps lets power-cycle modem and router.

1. Unplug the power cord of your Internet Modem.
2. Power off the router by unplugging the Belkin router from the power outlet (electric wall socket) as well. (IMPORTANT: Leave both the devices off for at least 60 seconds).
3. Then power on Internet modem first by plugging power cord back in and wait for 60 seconds until all the lights gets steady.
4. Once you see all the lights lit on the modem power on your Belkin router by plugging the power adapter into an electric outlet.

Now see if you can access internet if not reboot your computer and check for internet connectivity. This is the easiest workaround to fix any modem-router issues.

Belkin Router Setup Without CD:

Step 1 : Enter the following Internet protocol address into the address bar of a Web browser: 192.168.2.1.

Step 2 : Press "Enter" to access the router setup page for the Belkin device.

Step 3 : Go to Connection Type found under WAN and Click "Submit" if prompted to log in.

Step 4 : Select your Internet connection from the options and then click "Next".

Step 5 : Enter your account credentials or the network configuration for your service "such as your static IP address and your Internet service provider's gateway and subnet mask " into the appropriate fields if applicable Click "Apply Changes".

Step 6 : Select "Channel and SSID" from under Wireless and then enter a unique name for your network into the SSID field.

• Click "Apply Changes".
• Click "Security".

Step 7 : Choose "WPA/WPA2-Personal(PSK)" from Security Mode.

• Select "WPA-PSK+WPA2-PSK" from the Encryption Technique drop-down menu.
• Create a security key or password for the network.
• The key can consist of 8 to 63 characters "including letters numbers and punctuation" and is case-sensitive.

Step 8 : Click "Apply Changes" to finish manually configuring the Belkin router. Set up a strong password in the manual setting option and save it.

These are the various method in setting up both the wired and wireless Belkin router with CD and without CD.