How to Configure my Range Extender via WPS Button to Extend an Existing Wireless Network Coverage

Configure my Range Extender via WPS Button to Extend an Existing Wireless Network Coverage

A range extender is a device that helps extend the coverage of your wireless network by amplifying and repeating the wireless signal. Configuring a range extender via WPS button is one of the easiest ways to extend an existing wireless network's coverage. 

In this article, we will guide you on how to configure your range extender via WPS button to extend your network's coverage.

Before You Begin

Before you start configuring your range extender via WPS button, ensure that:

• Your range extender supports WPS configuration.
• Your wireless router supports WPS configuration.
• Your router and range extender are powered on and within range of each other.

Configuring the Range Extender via WPS Button

Follow these steps to configure your range extender via WPS button:

Step 1: Place Your Range Extender in the Right Location

Place your range extender in the optimal location to ensure the best signal coverage. A range extender should be placed halfway between your wireless router and the area where you need wireless coverage.

Step 2: Connect Your Range Extender to a Power Source

Connect your range extender to a power source and turn it on. Wait for the device to boot up.

Step 3: Locate the WPS Button on Your Range Extender

Locate the WPS button on your range extender. On most range extenders, the WPS button is located on the front panel of the device.

Step 4: Press and Hold the WPS Button

Press and hold the WPS button on your range extender for 5 seconds or until the WPS LED starts blinking.

Step 5: Press the WPS Button on Your Router

Within 2 minutes of pressing the WPS button on your range extender, press the WPS button on your router. The WPS LED on your router will start blinking.

Step 6: Wait for the Range Extender to Connect to Your Router

Wait for a few minutes until the range extender connects to your router. The WPS LED on both the range extender and router will turn solid, indicating a successful connection.

Step 7: Test the Range Extender

Once the range extender is connected to your router, test the device to ensure it is working correctly. You can do this by connecting to the extended network using your wireless device and checking the signal strength.

Configuring on Windows

Configuring a range extender via WPS button on Windows is relatively easy. Here are the steps to follow:

Step 1: Click on the Wi-Fi icon on your taskbar and select your network.

Step 2: If prompted, enter the password for your network.

Step 3: Locate the WPS button on your range extender and press and hold it for 5 seconds.

Step 4: Within 2 minutes of pressing the WPS button on your range extender, press the WPS button on your router.

Step 5: Wait for a few minutes until the range extender connects to your router.

Configuring on Mac OS

Configuring a range extender via WPS button on Mac OS is quite similar to configuring on Windows. Here are the steps to follow:

Step 1: Click on the Wi-Fi icon on your menu bar and select your network.

Step 2: If prompted, enter the password for your network.

Step 3: Locate the WPS button on your range extender and press and hold it for 5 seconds.

Step 4: Within 2 minutes of pressing the WPS button on your range extender, press the WPS button on your router.

Step 5: Wait for a few minutes until the range extender connects to your router.

Configuring on Android

Configuring a range extender via WPS button on an Android device is also relatively easy. Here are the steps to follow:

Step 1: Open your device's Wi-Fi settings and select your network.

Step 2: If prompted, enter the password for your network.

Step 3: Locate the WPS button on your range extender and press and hold it for 5 seconds.

Step 4: Within 2 minutes of pressing the WPS button on your range extender, press the WPS button on your router.

Step 5: Wait for a few minutes until the range extender connects to your router.

Configuring on iOS

Configuring a range extender via WPS button on an iOS device is also straightforward. Here are the steps to follow:

Step 1: Open your device's Wi-Fi settings and select your network.

Step 2: If prompted, enter the password for your network.

Step 3: Locate the WPS button on your range extender and press and hold it for 5 seconds.

Step 4: Within 2 minutes of pressing the WPS button on your range extender, press the WPS button on your router.

Step 5: Wait for a few minutes until the range extender connects to your router.

Conclusion

Configuring your range extender via the WPS button is a quick and easy way to extend the coverage of your existing wireless network. By following these simple steps, you can easily configure your range extender and improve the coverage of your wireless network.

Remember to place your range extender in the optimal location and test the device after configuration to ensure it is working correctly.