How to Setup Linksys RE9000 Extender

Setup Linksys RE9000 Extender:

If you want to learn how to setup Linksys RE9000 Extender, then you have opened up the right link. Before we proceed with the setup process, it is important for us to have some knowledge about MU-MIMO technology that stands for Multi-user, multi-input, and multi-output technology.

According to the SU-MIMO technology, if there are around 8 devices that are connected to the router, then every device will wait for its turn to come for sending and receiving signals from the router.

However, if you use MU-MIMO technology, the routers and wireless repeaters can concurrently receive and send the signal to every device that is connected to it. This makes the wireless experience more smooth and efficient as one is able to enjoy high-speed internet.

Router Compatible with This Technology:

Presently, this technology is available in Wave 2 routers and NEXT-Gen AC. Therefore, you will have to be very wise while deciding which router to buy for home or office use.

If you talk about Linksys RE9000 Extender, then this repeater can increase the bandwidth maximum up to 10,000 sq ft. Furthermore, if you have two routers at home, then this repeater will get connected to the router with better speed.

So, if you are using a wireless extender that is not meeting up with your expectations, then you must go and buy an MU-MIMO compatible router. There can’t be a better choice than Linksys RE9000 Extender.

How to Setup Linksys RE9000 Extender?

This extender has a specialty. It can be set up as a wireless extender or as a router. In this article, you will learn how to setup Linksys wireless extender as a repeater. Before setting up Linksys wireless extender, you need to ensure that you have the following things.

• A tab or computer system with a wireless capacity
• The name of your wireless network and the password of your router.
• Linksys RE9000 extender should be on default settings for the initial setup. In case it is not on the default mode, then reset it by pressing the reset button for 5 seconds.

Linksys RE9000 Extender Setup:

Step 1: First of all, connect your Linksys RE9000 Extender to the electrical outlet and then wait till the indicator light starts flashing orange.

Step 2: Now, on your tab, smartphone, or computer, search for Linksys wireless extender from the list of available wireless networks.

Step 3: Once your device gets connected to the wireless network, enter extender.linksys.setup in the location bar of your internet browser. Moreover, you can enter 192.168.1.1 in the location bar of the internet
browser.

Step 4: After that on your page, select start setup.

Note: If Linksys RE9000 is unable to detect DHCP server, then your default IP address would be 192,168.1.1. If you wish to skip the setup wizard, then select the manual setup link.

Step 5: You will see two options on the screen. Select Next below “As a wireless range extender option

Step 6: As you are using MU-MIMO technology, it will start scanning the present 5 GHz wireless network by default and make use of upstream connection to get better internet speed. Select the 5 GHz in order to increase it.

Note: In case your router only supports 2.4 GHz Wi-Fi, then go down and choose the option of 2.4 GHz Wi-Fi band.

Step 7: After that, you will be asked to enter the network key. After entering the password, press enter. The password of the network is no different from the password of your wireless network.

Step 8: After that, select next.

Note: If you wish to change the radio band of your wireless extender to some other option, then uncheck band steering and then put-in the credentials in the field provided.

Step 9: Use spot finder to select the best place for your Linksys RE9000 setup.

Step 10: Change the administrator password of your range extender and then save settings.

Step 11: Enter your email ID to register your Linksys RE9000. Select Next when you are done. Select skip, if you don’t want to register.

Step 12: Now try to connect all your devices to the Linksys wireless extender.

Note: the name of your Linksys wireless extender will be displayed in the list of wireless extender names.