How do I Reset ASUS RT ac3200 Router Password ?

Reset ASUS RT ac3200 Router Password:

In this article, you will find the username, password and default IP address and for the ASUS RT-AC3200 router. You can also learn about the preconfigured Wi-Fi settings of the device. At the end of this article, there is a manual for how to access the user interface and reset my ASUS RT-ac3200 router password.

Login data for the user interface

• IP address : (or http://router.asus.com)
• Username : admin
• Password : admin

Preconfigured Wi-Fi settings

• SSID : starts with ASUS
• Password :

How to Access the User Interface-

Accessing the user interface comes in use when one wants to change the configuration of the router. To change the configuration of the ASUS RT AC3200 Tri-Band Wireless-AC3200 you can follow the steps given below.

• Turn on the router.
• Connect the device and the router with wifi or cable network.
• Open any browser.
• Type the IP address or URL in the address bar and then press ‘Enter’ key.
• Type the username and password in the open user interface and press Enter again.

How to Reset Default Settings and Reset My ASUS RT ac3200 Router Password-

Resetting default settings come in use when you have changed and forgotten the login information which happens for most of us quite often.

Note: Not only settings like IP address, username and password will be set to factory settings but will other configurations might change as well.

Execute Hardware Reset-

To reset my ASUS RT ac3200 router password and other settings, follow the following instructions step by steps:

• Turn on the router.
• Press the reset button and hold for at least 6-7 seconds.
• The device will restart automatically.
• Default settings will be restored.

How to Execute Software Reset-

The installed software will help you restore the factory reset settings. With your access data, log in to the user interfaces and follow the steps as described in the instruction manual.

After you have factory reset the configuration of your device will be default. Therefore to login to the user interface, you will have to use the preset data.