How do I Reset My Arris TG1682G

A wireless router Arris TG1682G consists of a 1.2 GHz CPU and 512 MB RAM along with 128 MB flash memory. It has four-gigabit ethernet ports and zero USB ports, it is much faster than any ISDN service.

There can be various reasons to set up Arris TG1682G you may have forgotten your login credentials you are not able to use the default username and password or the router is not performing well.

It can be any one of the reasons and you can reset it in several ways. You can use hard reset instructions, or you can use 30-30 reset, or by resetting it to default factory settings or just by updating the firmware.

There are several interesting feature of this Arris tg1682g which are discussed below:

• It is much faster than any dialup or ISDN services.
• It supports Ethernet wireless connection.
• Arris tg1682g provides two independent telephone services as well as the high speed data.
• It comes with integrated MoCA home networking.
• It is equipped with one USB port.
• It comes with MoCA technology.
• Arris tg1682g equipped with Wi-Fi pairing button.
• It comes with two telephone port.
• It is equipped with present Wi-Fi security.

Reason Behind to Reset Arris TG1682g:

• If you forgot your credentials like username and password.
• You are not able to use default username and password.
• If your router is not performing as per your expectation, so in this case you are required to reset your Arris tg1682g.

Hard Reset Instruction for Arris TG1682g:

If your Arris tg1682g is not working properly or dropping connection and not proper responding , so in this case first you should reset your router and check problem has been resolved or still persist.

The other scenario, if you have forgotton your password or if you have misconfigured it or it can’t access any more.

You can Reset Your Arris TG1682g by the Following Ways:

The 30-30 Reset:

There are some following instruction of this model, but you can always perform 30-30 reset operation by following ways.

• When the router is power on, you need to press the reset button and hold it for approximate 30 seconds( you can use any paper clip or any sharp object to press the reset button).
• While holding the reset button pressed, you are required to unplug the router means you have to detach all the power cable from the router and hold the reset button for 30 seconds again.
• While still holding reset button down, you need to turn on the power to the whole unit again and hold it for another 30 seconds again.

This process is usually known as resetting of any router with its factory resetting.

Default Factory Resetting for Arris TG1682g:

If you have performed reset operation on your Arris tg1682g or not changed the defaults, you should be able to access the following settings

• Default gateway IP: 10.0.0.1
• Default username: admin
• Default password: password
• Default subnet mask:255.255.255.0
• Default DNS server name: 10.0.0.1

Note: if you are using default setting which is less secure. To increase security level of your Arris tg1682g, you should change them to increase the security and prevent your network by unauthorized access.

Process to Login the Arris TG1682g:

For login the Arris tg1682g, you need to follow some below following steps:

Step 1 : First you need to make sure that you are connected with router’s network either by Wireless network or any type of Ethernet cable

Step 2 : Thereafter open any installed browser on your computer and enter the web address which is http://10.0.0.1 in the address bar of the browser and press enter button

Step 3 : Now you will get the login screen window, where you have to enter your credentials like username and password. Please enter admin as username and password as password if you are using default credentials

Step 4 : Now you are logged in to the system. If you have not changed the password, it is recommended to change it first for preventing unauthorized access.

Step 5 : If these instructions do not work for you, the last option is to do factory reset of your router to get the default settings.

Arris TG1682g Firmware:

Staying up to date firmware is very good idea to keep your router secure and reliable. Suppose if you want to get some little extra functionalities, you need to open source firmware like dd-WRT, openWRT, LEDE.

Stock firmware is available in the download section on the modem’s support page. You can also refers router’s manual for the instructions on how to update or upgrade the router’s firmware.

In case if you want to face any kind of difficulty in performing reset operation after following this blog, you can contact technical support to resolve your issue. This is the detailed document on How do I reset my Arris tg1682g and some basic reasons behind to perform reset operation.

arris tg1682g factory reset, arris tg1682g reset, factory reset arris tg1682g