How to Fix Spectrum Modem Online Light Blinking

Fix Spectrum Modem Online Light Blinking

Different lights on your modem indicate different things. The blinking of a green light represents the traffic on the network, which is considered to be a very normal thing; a solid green light symbolizes a stable network connection. If you wish to fix the spectrum modem online light blinking, then you should consider performing a reset.

You can do so by disconnecting the router from the power source and then waiting for a few minutes to let the modem reset. After that, you can connect the router back to the power source and turn it on. While establishing the connection, check whether the light is solid or not because it determines the connection. 

Spectrum Modem Lights

As we mentioned before, Spectrum network makes use of routers and modems to offer internet service. However, the online light blinking can be a problem for some of the users. A few people don't get the meaning of each light glowing on the router, which makes it dfficult for them to have a good internet experience. So, let us get to know the meaning of different lights on the Spectrum router.

LAN: In case you are using the internet and there is traffic on the network, then a blinking green light is going to reflect a normal internet connection.

Internet: This light needs to be off at all times.

ADSL: If this light is solid green, then the network connection is stable and there is no problem in the service. In case the light keeps on blinking, then you need to make the connection tight by restarting the router and modem to get a secure and stable internet connection.

Power: If the power light is green and stable, then that means your modem has a power connection. However, if you see that the red light is blinking, then that means there is a signal issue.

In some of the cases, the power button is given at the back of the router. One must make sure that the power button is on in case the lights are off. If this resolves your issue, then you are done here. In case not, then you will have to move ahead with the steps to reset your Spectrum modem and router.

How to Reset Spectrum Modem?

If you want to know how to reset Spectrum modem, then follow these steps and fix Spectrum modem online light blinking problem.

• Take out the power wire and disconnect the modem from the power source. In case there are batteries in the modem, then you need to remove them too.
• Wait for a minute and allow the modem to reset.
• Now, connect the power wire to the modem or if you removed the batteries, then you need to put them back in.
• Give two minutes to the modem to establish the connection. Also, check that the light is solid as it determines the connection.
• In the end you need to check if the internet is working or not.

Reset Spectrum Router

Resetting the router is as important as resetting the modem. The steps to perform are pretty much the same. Mentioned below are the steps that you need to carry out to reset the router to fix Spectrum modem online light blinking problem.

• Remove the power wire from the router and the other hardware.
• Allow the router to reset for the next 30 seconds as it is important to let the router cool down.
• Insert the power wire once again. In case there is a power button, then turn it on.
• Wait for two minutes and let the router reboot. It is important to give that much bootup time to the router. Additionally, the router is going to get a new private IP address.
• Now, the router will restart and the internet will start working.