How to Fix VPN is not Working with Spectrum

If the VPN is not working with Spectrum, then the possible reason behind this issue could be incompatible software. You can try installing a proper VPN and inspect the firmware and network hardware. Make sure that the modem settings are configured correctly because the correct configuration of the modem settings could interfere with the functions of the VPN.

Even outdated from where can create compatibility issues with the VPN. You can also reach out to the spectrum tech support team for guidance and help if you are not able to solve the problem on your own.

Here are Some Methods to FIX VPN is not Working with Spectrum:

1 - Installing an Appropriate VPN

Definitely, you would want to fix the issue that irritates you in the form of “VPN is not working with Spectrum”, but in an ideal scenario, it requires you to install an effective VPN so that you can enjoy seamless internet connectivity while you attempt to stream 4K videos.

While being on the lookout to install a desired VPN you must make sure that a proper VPN connection enables P2P connection on servers of all kinds.

2 - Keeping a Check on the Modem Settings

Step 1 - Initially, you just need to launch the “Settings” page of your modem. To get this done you can simply refer to the user manual that lays down a complete process to open the “Settings” page of your modem.

Step 2 - Now, open the “Firewall” section dialog box and ensure that encrypted connections are not blocked followed by enabling the PPTP protocol.

Step 3 - Also, try to enable all go-through settings while being on the last step of enabling all modem-related settings.

3 - You can also Opt to Update Your Router’s Firmware

Updating your router’s firmware may also help you fix the “VPN is not working with Spectrum” issue if you carry out the relevant procedure in the following way.

Step 1 - You can begin by opening your router’s website followed by a bit of navigation to locate your model and then heading to the “Firmware” section.

Step 2 - Continue by clicking on the “Download” option to get the latest executable file of your router saved on your computer followed by logging in to the router’s setting page.

Step 3 - Here at this moment you just have to go to the “Firmware Upgrade” section followed by choosing the relevant executable file subsequently.

Step 4 - Finally go on to select the file that you downloaded and then wait slightly for it to get installed.